On October 9, 2024, the third new factory of our Zhuzhou Xinda Machinery Technology Co., Ltd. was successfully capped. This is a great cause for celebration. The new plant, which covers an area of 8,599 square meters, will be put into use soon, and at that time, we will have more automated production equipment put into use. We produce the main cutting products are, driving teeth/roadheader teeth, coal teeth, rotary cutting teeth, open pit mining teeth, road milling teeth, block and sleeves.

This Sep,2024,meet us at the following two international mining exhibition.

Which exhibitions we attend in year 2024 to exhibit our mining cutter picks? Meet us in Las Vegas at MINEXPO 2024 UGOL ROSSII & MINING 2024 MINING INDONESIA 2024

During 4.June,2024-7.June,2024,mining cutters factory-Zhuzhou Xinda Machinery Technology Co Ltd participate the coal mining exhibition in russia. On this exhibition, we see many old customers and new customers who required our mining cutters and carbide insert. As Russia's coal resources reserves rank second in the world, coal is complete, coal quality, according to the latest industrial production statistics monthly report express data released by the Russian Federal Bureau of Statistics (theP) on May 29, 2024

The Ordos International Coal and Energy Industry Expo is divided into high-quality development achievements, new energy technology, intelligent construction and technology of coal mine, clean and efficient utilization of coal, high-end intelligent manufacturing, open-pit mining technology and equipment and other exhibition areas, which not only comprehensively presents the ecological picture of various industries such as mining, washing and processing, transportation and clean utilization. At the same time, it covers a wide range of new technologies and new processes. At the exhibition, Zhuzhou Xinda Machinery Technology Co., LTD., as the most knowledgeable rock cutter expert, showed products suitable for coal mining cutter, mine driving cutter, surface mining cutter and so on, suitable for very hard rock.

In the mining and construction industry, as a key wear part, the wear resistance of the rock pick directly affects the production efficiency and cost. With the progress of industrial technology, the requirements for the wear resistance of the rock pick are getting higher and higher. Zhuzhou Xinda Machinery Technology Co., LTD., as a technology leader in the rock pick industry, has been committed to improving the wear resistance of the pick to meet the needs of the market and customer expectations.

During 22.April 2024 to 24.April 2024,our company-zhuzhou xinda machinery technology co ltd participateThe 22nd 2024 Taiyuan Coal (Energy) Industry Technology and Equipment Exhibition. We have the booth area 36 ㎡,on this exhibition,we exhibit our mining picks,roadheader picks, coal mining picks.

2024 Lunar New Year is coming, in order to celebrate the arrival of the new year, review and sum up the work of the past year, look forward and plan for the future, on 5 February 2024, Zhuzhou Xinda Machinery Technology Co., Ltd. held the annual meeting, the meeting, the company's management of the whole year in the production of cutting picks appeared in the shortcomings and can be improved to do a discussion on the domestic and international cutting picks market situation and sales made an In the new year, we set new production and sales targets. Strive to achieve a new leap through the efforts of all staff. In the annual meeting, the company management reviewed the company's development history

In order to expand the domestic and international market for cutting teeth business, quickly seize the international market, recently, Zhuzhou Xinda Machinery Technology Co., Ltd. officially established the domestic northwest region marketing division and Southeast Asia marketing division, which is another important milestone in the company's development process.

Among them, S series of cut-off teeth are used in roadheader, U series of cut-off teeth are used in coal mining machine, coal mining cut-off teeth can be divided into common cut-off teeth, wear-resistant cut-off teeth, hard rock cut-off teeth, non-sparking cut-off teeth, super-hard rock cut-off teeth and sandstone cut-off teeth.

Coal interceptor is a tool used for mining coal, and its adaptability mainly depends on factors such as geological conditions, nature of coal and mining methods. In the following, we will discuss the adaptability of coal interceptor in mines in different areas from these three aspects.

Industry Dark Horse, Wonderful Appearance From 7 to 9 April 2023, Zhuzhou Xinda Machinery Technology Co., Ltd, a rising star in the engineering boring, coal roadway and coal mining gear industry, was invited to participate in the 17th Yulin International Coal Expo, sharing the company's research and development of ultra-wear-resistant gear series products and attracting dealers across the country to join the site.

As the most important part of the gear, the quality of alloy head directly determines the efficiency and effectiveness of mining. Most of the alloy head manufacturers in the market are outsourced or customised, which makes it difficult to control the quality of the alloy head.

During the period of 25-29 September 2023, Zhuzhou xinda machinery technology co ltd in Peru International Mining Exhibition, attracted the attention of visitors and industry experts from Europe, America, South America and other parts of the world, and received high praise.

The coal interceptor is one of the most important components widely used in coal mines and other mining equipment, and its role is to cut and collect coal from the ore deposit. However, due to the complexity of the operating environment and the significant workload, coal interceptors are often prone to premature wear and damage. Below are some suggestions that can help avoid premature wear and damage of coal interceptors.

The number of interceptors needed to mine 10,000 tonnes of coal is a complex issue that requires consideration of several factors. Although the exact number will vary depending on the operation and working conditions, we can make an estimate by making some basic assumptions and inferences.

Truncal attrition is the wear, erosion, or destruction of tooth surfaces that occurs as a result of external or internal stimuli. It is one of the dental problems that many people don't pay attention to, yet it can have a serious impact on oral health. It is important to protect our teeth by preventing and minimising the occurrence of truncal attrition in our daily lives.

Interceptor alloy head (hereinafter referred to as interceptor head) is a common tool, which is widely used in various mechanical equipment. However, sometimes we will find that the cut-off head is easy to fall off, which brings inconvenience to our work. Here I will analyse the possible reasons from several aspects.

Cutting gear is a key component of mining machinery, its main function is to cut off the rock or coal mine. As they are subjected to high impact and abrasion during the mining process, they need to be wear-resistant to ensure their service life.

In recent years, the problem of truncated wear and tear has attracted widespread attention among consumers in China. Many people will find that the life span of goods is significantly shortened when they buy goods, especially some electronic products, daily necessities and clothing, etc., and the problem of truncation loss becomes more and more prominent. So, why do we buy goods with such high truncation loss? This reason cannot be ignored, and we will explore it below.